// ============================================
// Tapo Ceiling Mount - Blank Camera Adapter
// ============================================
// A template adapter. Its top is a cup that locks onto the collar bottom
// ring. Its bottom is a flat surface with a central cable hole and an optional
// generic screw pattern. Copy this file and add your own camera interface
// below.
//
// Print orientation: rim on the bed. The lugs and the latch beam print on the
// bed. No support.

parameters_only = false;
include <tapo_ceiling_mount_parameters.scad>;

module tapo_camera_adapter_blank() {
    difference() {
        adapter_core();
        // Optional generic screw pattern in the base, from the camera side.
        if (blank_screw_pattern)
            for (s = [-1, 1])
                translate([s * blank_screw_spacing / 2, 0,
                           adapter_top_z - adapter_plate_t - 0.01])
                    cylinder(d = blank_screw_d, h = adapter_plate_t + 0.02);
    }
}

tapo_camera_adapter_blank();